Chanter reed blade thickness viewing

Pipemaking, reedmaking & maintanence. Expert pipemakers are eager to answer your questions

Chanter reed blade thickness viewing

Postby pipemakermike » Sat Nov 02, 2013 9:54 am

After many years of holding reeds up to a light and trying to shield out the bulb with my fingers I have made a little tool to help.
I stuck 2 strips of black insulation tape onto a cheap (about 3 quid) LED torch leaving a clear strip in the middle. Now all I have to do is to hold the reed in front of the torch and the blades are perfectly illuminated. Pic below:-
reed_blade_thickness_backlight.jpg
reed_blade_thickness_backlight.jpg (15.05 KiB) Viewed 641 times
pipemakermike
 
Posts: 206
Joined: Mon May 23, 2011 5:05 pm
Location: Cambridge England
Full Name: Mike Nelson

Return to Pipemaking

Who is online

Users browsing this forum: No registered users and 1 guest

cron