Drones for D set

Pipemaking, reedmaking & maintanence. Expert pipemakers are eager to answer your questions

Drones for D set

Postby bob Salter » Fri Jul 27, 2012 6:03 pm

Are any of the drones in the C&B suitable for a D set. I have the second edition. If not could some kind soul let me have data for a set as I find myself stumped.

bob Salter
Posts: 47
Joined: Thu Mar 15, 2012 1:35 am
Location: Scone, Perth
Full Name: Bob Salter

Re: Drones for D set

Postby pipemakermike » Mon Jul 30, 2012 2:35 pm

Hi Bob
There isn't a "correct" size for the drone lengths as it is dependant to a considerable degree on the style and setting of reeds and the bore of the parts. I have only made one D chanter and I found that by making special reeds I could get the required drone harmony using a set of standard (to me) drone parts. Having said that and looking at the data I have collected whilst I have been developing the carbon fibre drone reeds, I can have a guess at the likely working lengths of the drones. So, assuming that you want a drone harmony similar to the common Northumbrian Small pipes in F or G, you will need a low A, a low D, a high A and a high D. I have found from a set of pitch/length measurements that a length for the drone that is likely to work is approximately 0.77 times the theoretical acoustical length. The theoretical length for A2 = 786.36 so I would start at 787.0 x 0.77 = 605mm. I have compared this with the lengths I got from my reed testing of 293 & 301.5 for the A3 drone length and doubling those for the next octave down give a length close to the 605mm above.
You could take the low and high D from the lengths for the concert pitch drone parts from the drawings on my website

There really isn't a single solution to the lengths as there are so many variables. I am sure that others will offer different solutions.
Posts: 206
Joined: Mon May 23, 2011 5:05 pm
Location: Cambridge England
Full Name: Mike Nelson

Return to Pipemaking

Who is online

Users browsing this forum: No registered users and 0 guests